We are continuing to repair John’s 67 Chevelle. It required a significant amount of metal work to repair and restore the frame and body panels. At this time we have the frame completed, the trunk floor has been repaired, and the quarter panels have been put into place. Almost done!
We are really excited about a new restoration project that has just come in. It is a 32 Ford Pickup that has had a lot of modifications done to it, so it’s going to require a significant amount of bodywork to make it nice again. We are doing a complete body and paint on the (...)
We are now painting Igor’s 65 mustang viper blue with white stripes, and we took some pictures of the process. We painted the white base first before masking the white up and spraying the blue on the rest of the car. Removing the mask exposed the sharp white stripes, and we followed that up with (...)
We have been busy blocking and priming Doug’s 41 Willys primer and paint. Here are a few photos of it in the paint booth all masked up and ready for paint. Also, here are a few pictures of the car painted. We have applied Victory Red base coat and four coats of high build clear. (...)
The 41 Willys had its first coat of super build primer applied. After it came out of the paint booth, we have bolted the doors and trunk lid back on. The body is now guide coated so we can see if there are any high or low spots while we block it out. The Willys (...)
Here are some pictures of the 65 Mustang in first coats of super build primer. We will block this down starting with 100 grit and work our way up to 320 grit to get it ready for high build primer.
We are doing the body work on Igor’s 65 Mustang. Various panels are being attended to. We are repairing dents and corrosion spots.
Here we have the parts of the 41 willys in the spray booth, ready for first sprayable putty coats. We will put three coats on at this time, waiting for it to flash of in between coats. We will bake the sprayed parts at 130F for about 30 minutes and then let it sit overnight (...)
Here is the progress report on Doug’s 41 Willys Restoration project. We removed the motor as it is getting rebuilt by Dale at DSE. We are repairing all the cracks in the fiberglass with matt and resin and then doing the body work, getting it ready for the first round of spray filler.
We now have all the metal work done on the 65 Mustang!!! We are getting ready to put two coats of epoxy primer on the body and all the parts. We will let that dry for a couple days and then bolt it all back together and line up everything before we start the body (...)
